docs(m4): record #99 as-built and sweep stale draggable-tick refs (#99)

.planning/milestones/v0.5/M4/goals.md

@@ -20,13 +20,18 @@ Raw runner evidence recorded; Ty owns gate exit (QUALITY-25/30).
 ## Goals (accepted direction)
 
 1. **Stabilize + polish the M3 experience (A) — includes the #99 tape-line calibration (B).**
-   - **Tape-line calibration (#99):** replace the axis-rectangle calibration with a draggable
-     tape-line (black line + two rifle-scope end ticks). Declared length = distance between
-     ticks (owner-declared); scale = tick-pixel distance / declared length, no
-     `maskSpanAlong` check. New
-     requirement row(s); supersedes the projected-span length model in CAPTURE-60/75. The `m4`
-     branch already carries `crop_fill` + `TapePrototype.svelte` (`?tape-prototype`); M4
-     promotes it from prototype to shipped.
+   - **Tape-line calibration (#99) — SHIPPED (as-built 2026-09-25, UAT signed off):** the
+     axis-rectangle calibration is replaced by a **fixed** black centre line with two end
+     ticks. The line is a stage fixture and is **never an owner input** (not draggable, not
+     focusable, not keyboard-nudgeable). The **source photo/slab is the only thing that
+     moves** — pan/zoom/tilt it until it lines up with the fixed line at the place the tape
+     measurement was taken. Declared Length = the real inches read off the tape, and the
+     fixed line represents that same length; scale = fixed-line pixel span / declared
+     Length, no `maskSpanAlong` check. The crop slider alone sets the line ends
+     (`crop_fill=90` ⇒ each end 5% from its edge). The earlier `?tape-prototype` sandbox,
+     `TapePrototype.svelte`, `frontend/src/png/crop.ts` and the `sveltedrag` dependency are
+     all superseded/removed. Requirement rows CAPTURE-170/175/75 carry the as-built; see
+     `tasks.md` T2 for detail.
    - **UX polish:** photo-picker look/feel (#91), photo filenames on submit (#92), capture
      gated on a tested Woo connection (#93), review UI is always the human-pick flow (#94),
      debug mode (#95), required-photo lock glyph (#100). (#96 Call 1/2 prompt viewer drops
@@ -125,9 +130,10 @@ Raw runner evidence recorded; Ty owns gate exit (QUALITY-25/30).
 
 ## Acceptance criteria (draft)
 
-1. **Tape-line calibration + M3 polish ship together (Goal 1):** the `?tape-prototype`
-   sandbox is replaced by the shipped calibration path (owner drags both ticks; declared
-   length = tick distance; no `maskSpanAlong` check), and the
+1. **Tape-line calibration + M3 polish ship together (Goal 1):** the tape-line calibration
+   ships as a **fixed** centre line the owner pans/zooms/tilts the slab onto (line is never
+   an owner input; crop slider sets its ends; declared length = the real tape inches, and
+   the fixed line represents that same length; no `maskSpanAlong` check), and the
    M3 polish issues (#91–#100, excluding #96 which drops with Call 1) are closed with
    passing tests and raw runner evidence.
 2. **The review flow is human-driven, thumb-first, and Call 1-free:** the owner can pick

.planning/milestones/v0.5/M4/tasks.md

@@ -26,25 +26,40 @@ exit (QUALITY-30); agents record raw evidence, never declare green.
 - **Sequence:** first task of the sprint.
 - **Stop:** rows merged + gate green. **Evidence:** runner output.
 
-### T2. #99 tape-line calibration (folded into G1)
-- **Goal:** G1. **IDs:** CAPTURE (dimensions), REQS-50. **Issues:** #99.
-- **Skills:** `systematic-debugging` (verify the prototype assumption),
-  `wireframe-review-iteration` (reference the overlay interaction), `svelte-core-bestpractices`.
-- **Starting point:** `frontend/src/capture/TapePrototype.svelte` + `?tape-prototype`
-  sandbox on the `m4` branch; `docs/design/issue-99-tape-line-overlay.html` (approved
-  wireframe); `frontend/src/png/crop.ts` (projection logic).
-- **Work:** promote the prototype to the shipped calibration path (owner drags both
-  ticks to the actual tape start/end; scale = tick-pixel distance / owner-declared
-  length — no `maskSpanAlong` check), delete the
-  sandbox + query-param gating, keep `crop_fill` (already landed in 818874e).
-  **Scope (Ty confirmed):** confined to the calibration step — the photos-ready
-  lineup (CAPTURE-130) stays as-is; #99 does not touch it.
-- **Verification:** unit tests in `frontend/src/png/*` (tape geometry + tick-distance
-  scale math in photo px under pan/zoom/rotate), `tsc --noEmit`,
-  manual calibration on one slab at 375px.
+### T2. #99 tape-line calibration (folded into G1) — AS-BUILT, shipped
+- **Goal:** G1. **IDs:** CAPTURE-170, CAPTURE-175, CAPTURE-75. **Issues:** #99 (issue
+  body still describes the superseded draggable-tick model — this entry is the as-built).
+- **Skills:** `systematic-debugging`, `svelte-core-bestpractices`,
+  `docker-uat-deploy` (isolate-and-verify the review preview).
+- **As-built:** a **fixed** black centre line with two end ticks, drawn on the stage
+  fixture. The line is **never an owner input** — not draggable, not focusable, not
+  keyboard-nudgeable, and not part of the published pose. The **source photo/slab is the
+  only thing that moves**: drag to pan, wheel/pinch to zoom, the ↻ handle or arrow keys
+  (Shift = fine step) to tilt. The owner aligns the *slab* to the fixed line at the place
+  the tape measurement was taken. Typed Length is the real inches read off the tape, and
+  the fixed line represents that same length. Scale = fixed-line pixel span / declared
+  Length; `maskSpanAlong` is not the scale source. The crop slider is the **sole** control
+  of the line ends: `crop_fill=90` puts each end 5% from its corresponding edge.
+  Calibration rotation applies to the calibration clean PNG + overlay only; batch
+  siblings stay unrotated.
+- **Superseded (do not restore):** draggable ticks; `TapePrototype.svelte` and the
+  `?tape-prototype` sandbox (both deleted); `frontend/src/png/crop.ts` (removed in
+  6000ac2 — crop geometry now lives in `frontend/src/capture/tapeLine.ts`
+  `cropEnds(fillPercent)`); the `sveltedrag` dependency (404s on npm, never added).
+  The wireframe `docs/design/issue-99-tape-line-overlay.html` lives on branch
+  `issue-99-tape-line-overlay` (63b8879), not on `m4`.
+- **Verification:** unit tests in `frontend/src/capture/tapeLine.test.ts` (ends fixed by
+  the crop slider, never an owner input) + `frontend/src/png/{inventory,overlay}.test.ts`
+  (calibration rotation reaches the calibration PNG/overlay only); `tsc --noEmit`;
+  `npm run build`; e2e `frontend/tests/e2e/tape-fixed-line.spec.ts` (no tick drag; a tick
+  drag behaves identically to a pan; ends follow the crop slider).
 - **Sequence:** parallel with T3–T5; no dependency on T1.
-- **Stop:** prototype shipped, `?tape-prototype` removed, tests green.
-  **Evidence:** test output + a 375px capture of the calibration drag.
+- **Stop:** SHIPPED. UAT-signed off by Ty 2026-09-25 on the M4 review preview
+  (`http://192.168.1.202:10883/?noload=1`, build `a756cf5`, branch `m4`).
+- **Evidence:** `npm test` 102/102; requirements + coverage gates green; live e2e on the
+  deployed preview (0°/20° rotation produces differing clean PNG + overlay bytes); render
+  gate clean at 1440/768/375 with no overflow or clipped text; Ty's UAT sign-off.
+  **Not covered:** `svelte-check` still reports its known 42-error baseline.
 
 ---
 

deploy/INVENTORY.md

@@ -117,3 +117,33 @@ Do not put a host name in the product spec.
   GET slab/taxonomy/settings 200, review 200.
 - In-repo mock e2e (m3-create + photo-strip) 6/6 green against the same bundle hash before deploy.
 - Not done: commit/push of the import restore; Woo publish path not re-exercised this round.
+
+### 2026-09-25 08:57 PDT — M4 review preview: #99 fixed tape line + calibration rotation
+
+- Source: branch `m4`, commit **`a756cf5`** (`fix(m4): drop stale tick-nudge hint from tape page (#99)`),
+  pushed and verified on `origin/m4`. `matches HEAD`: **yes**. Preceding M4 commits on the same
+  branch: `1882fa3` (calibration tilt applied to the calibration PNG/overlay only) and
+  `7908a99` (tape calibration collapsed onto one page).
+- Image `deploy-frontend:m4-a756cf5` (`sha256:26402a77…`) built on the 5060 from a clean release
+  archive, **not** from the `~/slab-deploy` greenfield checkout. Container `slabuploader-m4-review`
+  recreated on network `deploy_default`, host port `10883:80`, **zero mounts**.
+- URL: http://192.168.1.202:10883/?noload=1 (M4 review only). **Not** `10881` — that is the old
+  `main` stack and has no Length page. `10882` is the API, not a UI.
+- Bundle: `assets/index-BI2cLnOA.js`. Served bundle has **zero** `Drag the ticks` /
+  `nudge the last tick` strings and **does** contain the fixed-line hint.
+- Main stack untouched: `:10881` and `:10882/api/health` both 200 throughout.
+- Sample data preserved: **yes** — the review container is volume-free; the real DB was never
+  rebuilt or re-seeded.
+- Live verification (deployed URL, real backend): the fixed line renders with both end ticks;
+  a drag starting on a tick behaves identically to a pan elsewhere (line does not move); the
+  crop slider moves the line ends; Length/Thickness → Calculate reaches Photos ready. A drag is
+  still allowed (that is the intended pan).
+- Gates: `npm test` 102/102; `tsc --noEmit` clean; requirements + coverage gates green;
+  render gate clean at 1440/768/375 (no overflow, no clipped text, no page/console/HTTP errors).
+- Regression guard proven to fail against pre-fix code, not just pass post-fix.
+- Ty UAT sign-off: **length e2e signed off 2026-09-25**; minor bugs to be filed separately.
+- Not done: `svelte-check` still reports its known 42-error baseline (no new error from this work);
+  `Calculate` (42px) and `Fit` (41px) are marginally under the 44px touch reference — pre-existing,
+  deliberately left for a separate decision; Gitea #99's **body** still describes the superseded
+  draggable-tick model (the as-built is recorded in `tasks.md` T2 and requirements rows
+  CAPTURE-170/175/75).