1.2 KiB
1.2 KiB
Host
Port block 10880–10889 on ubudual5060 is allocated to this project.
:10880 is Ty's local Node/SvelteKit and must never be bound by project deploys.
The dev-test environment binds 0.0.0.0 so any machine on 192.168.1.0/24 can reach it.
Check to see if you are running on ubudual5060 (192.168.1.202) before attempting SSH.
Dev-test environment (M2 current, M3 incoming)
- Host:
ubudual5060/ LAN192.168.1.202/ Tailscale100.64.0.9 - Container:
slabuploader-m2-overnight(imageslabuploader-m2:overnight) - Port: 10881 → 80, bound
0.0.0.0 - URLs:
http://192.168.1.202:10881(LAN) ·http://100.64.0.9:10881(Tailscale) - M3 replaces this container on the same port; remove the M2 container once M3 is healthy.
Ty local Node/SvelteKit (do not overwrite)
- Host:
ubudual5060/100.64.0.9 - Container:
slabuploader-m1 - Port: 18080 → 80 (inventory previously listed 10880; that port is off limits to project deploys)
- URL:
http://100.64.0.9:18080 - Never recreate or remap this container for project deploys.
Future deploys use a separate container name and a free port in 10880–10889
(other than 10880), bound 0.0.0.0.
Do not put a host name in the product spec.