# Host

Port block `10880`–`10889` on ubudual5060 is allocated to this project.
`:10880` is Ty's local Node/SvelteKit and must never be bound by project deploys.
The dev-test environment binds `0.0.0.0` so any machine on `192.168.1.0/24` can reach it.
Check to see if you are running on ubudual5060 (192.168.1.202) before attempting SSH.

## Dev-test environment (M2 current, M3 incoming)

- Host: `ubudual5060` / LAN `192.168.1.202` / Tailscale `100.64.0.9`
- Container: `slabuploader-m2-overnight` (image `slabuploader-m2:overnight`)
- Port: **10881** → 80, bound `0.0.0.0`
- URLs: `http://192.168.1.202:10881` (LAN) · `http://100.64.0.9:10881` (Tailscale)
- M3 replaces this container on the same port; remove the M2 container once M3 is healthy.

## Ty local Node/SvelteKit (do not overwrite)

- Host: `ubudual5060` / `100.64.0.9`
- Container: `slabuploader-m1`
- Port: **18080** → 80 (inventory previously listed 10880; that port is off limits to project deploys)
- URL: `http://100.64.0.9:18080`
- **Never** recreate or remap this container for project deploys.

Future deploys use a **separate** container name and a free port in `10880`–`10889`
(other than `10880`), bound `0.0.0.0`.
Do not put a host name in the product spec.