fix(capture): align masked tape calibration with #99

docs/REQUIREMENTS.md

@@ -26,10 +26,12 @@ Sources reconciled 2026-09-18 from the current branch docs plus the `pre-simplif
 | CAPTURE-45 | A Sensitivity change debounces 2000 ms; a Sheet change runs immediately; the overlay recomputes in a worker and the last good overlay stays visible. | shipped | frontend/src/capture/session.calibrate.test.ts |
 | CAPTURE-50 | The mask overlay renders on the source photo and the owner approves it; approval is blocked when the mask has no slab pixels. | shipped | — |
 | CAPTURE-55 | The mask must be a single contiguous slab contour; otherwise the resolution is a retake. | shipped | — |
-| CAPTURE-60 | The length axis is the long side of the minimum-area bounding rectangle of the mask; the owner rotates it to the prevailing length and confirms. | shipped | frontend/src/geometry/rect.test.ts |
+| CAPTURE-60 | The owner aligns the length axis to the prevailing slab length and confirms it; the tape-line calibration is independent of the mask's minimum-area bounding rectangle. | M4 | frontend/src/geometry/rect.test.ts |
 | CAPTURE-65 | On a nearly square slab the owner chooses which axis is length. | shipped | — |
 | CAPTURE-70 | The owner enters length and thickness in 1/8 inch steps. | shipped | frontend/src/capture/measureInputs.test.ts |
-| CAPTURE-75 | scale equals longest_axis_px divided by measured length, where longest_axis_px is the mask span end to end along the approved axis, not the rectangle edge. | shipped | — |
+| CAPTURE-75 | Scale equals the pixel distance between the two owner-positioned tape-line ticks divided by the owner-declared length; mask span (`maskSpanAlong`) is not checked or used as a length or scale source. | M4 | — |
+| CAPTURE-170 | The calibration overlay shows a draggable tape-line with two rifle-scope end ticks; the owner positions the ticks at the tape's actual start and end. | M4 | — |
+| CAPTURE-175 | The owner-declared length is the distance represented by the tape-line ticks, and scale uses their pixel distance in source-photo coordinates, independent of mask span. | M4 | — |
 | CAPTURE-80 | Widths sample every 6 inches perpendicular to the approved axis, dropping the first and last 6 inches; min, max, and average are reported; if length is 12 inches or less all three are zero. | shipped | frontend/src/measure/measure.test.ts |
 | CAPTURE-85 | sqft equals mask_pixels divided by scale squared divided by 144, rounded half-up to 2 decimals. | shipped | frontend/src/measure/measure.test.ts |
 | CAPTURE-90 | bdft equals sqft times thickness_in, rounded half-up to 2 decimals, with no divide-by-12; 1 sqft at 1 inch equals 1 bdft. | shipped | frontend/src/measure/measure.test.ts |
@@ -71,7 +73,7 @@ The listing is built in two inference calls, both optional. Call 1 (vision) read
 | METADATA-80 | The server assembles the name and short description deterministically from the primary wood category's patterns and the dimension fact block. The patterns use only synced taxonomy terms and capture facts. | M3 | — |
 | METADATA-90 | The dimension fact block supplies the exact strings the patterns interpolate and the only numbers Call 2 may print; there is no L by W by T rectangle assumption. | M3 | — |
 | METADATA-55 | Call 2 runs on demand and produces the long description. | M3 | — |
-| METADATA-60 | Call 2 receives the processed photos, the metadata confirmed or changed in review, the primary and secondary wood categories, the parent-category path, the dimension fact block, and brand/geo context. | M3 | — |
+| METADATA-60 | Call 2 receives the processed photos, the metadata the owner picked or changed in review, including primary and secondary wood categories and the human-selected taxonomy attributes and tags, the parent-category path, the dimension fact block, and brand/geo context. | M4 | — |
 | METADATA-65 | The model never invents or alters a dimension; every number it prints comes from the fact block. | M3 | — |
 | METADATA-95 | The dimension-overlay image is never sent to the model. | M3 | — |
 | METADATA-70 | With inference off, the server produces the long description. | M3 | — |
@@ -82,6 +84,7 @@ The listing is built in two inference calls, both optional. Call 1 (vision) read
 | METADATA-107 | Before the prompt revision interface is exposed beyond the trusted network it requires authentication. | later | — |
 | METADATA-110 | The Generate text control appears only when content generation is enabled and the inference endpoint is reachable, and is disabled when the text service is down. | M3 | — |
 | METADATA-115 | A runtime inference failure is classified recoverable or unrecoverable for the owner: recoverable offers Retry, unrecoverable gives a plain message explaining it. | M3 | — |
+| METADATA-120 | Call 2 is grounded in the owner's human-picked primary and secondary wood categories and taxonomy values from review; it does not receive or depend on Call 1 suggestions. | M4 | — |
 
 ## REVIEW — confirm, tweak, ready
 
@@ -97,6 +100,7 @@ The listing is built in two inference calls, both optional. Call 1 (vision) read
 | REVIEW-40 | The owner can edit any field, including generated title and description, until create, except the calculated measurement fields (widths, sqft, bdft), which are not user mutable. | M3 | — |
 | REVIEW-45 | SKU is 3 to 24 characters, alphanumeric and hyphen only. | M3 | — |
 | REVIEW-50 | Title and short_description warn past 60 and 160 characters and never exceed the store's hard limits; description has no maximum. | M3 | docs/contracts/WOO-API.md |
+| REVIEW-55 | Review always presents a thumb-first manual taxonomy flow: the owner selects species, primary and optional secondary wood categories, Edge, Figure, Grade, Moisture, and optional synced tags; no Call 1 suggestion, inference pre-fill, or AI marker is shown. | M4 | — |
 
 ## PUBLISH — store submission
 
@@ -113,7 +117,7 @@ The listing is built in two inference calls, both optional. Call 1 (vision) read
 | PUBLISH-36 | Every publish failure is classified for the owner as recoverable (he can act) or unrecoverable (outside his control), and the plain message states which it is and the next step. | M3 | — |
 | PUBLISH-37 | A recoverable failure points at the field to fix, or offers Retry while the draft and photos are retained. | M3 | — |
 | PUBLISH-38 | An unrecoverable failure says it is outside the owner's control and offers the available next step. | M3 | — |
-| PUBLISH-40 | Images upload as processed PNGs with alpha; the clean primary, the primary dimensioned copy, and every remaining batch photo the owner selected are uploaded, with no upper cap on the number of images. | M3 | — |
+| PUBLISH-40 | Images upload as processed PNGs with alpha; the clean primary, the primary dimensioned copy, and every remaining batch photo the owner selected are uploaded, with no upper cap on the number of images. | M4 | — |
 | PUBLISH-45 | The Woo image order is the photos-ready lineup: clean calibration, dimension-overlay copy, then the rest in capture order. | M3 | — |
 | PUBLISH-50 | Published means the store create succeeded, not that the product is live when status is draft. | M3 | — |
 | PUBLISH-55 | Only non-null fields are sent; the payload carries name, type simple, status, sku, slug, regular_price, description, short_description, categories, tags, images, attributes, virtual false, downloadable false, catalog_visibility visible, sold_individually true. The slug is the sanitized product name plus the lowercased SKU. | M3 | docs/contracts/WOO-API.md |
@@ -206,3 +210,4 @@ The listing is built in two inference calls, both optional. Call 1 (vision) read
 | QUALITY-115 | Browser end-to-end capture through publish is verified on iOS Safari, Android Chrome, and desktop Chrome, Edge, and Firefox. | later | — |
 | QUALITY-120 | No raw status code, stack trace, or internal code reaches the owner in any tested path. | M3 | — |
 | QUALITY-125 | An encrypted credential stored by Settings decrypts back to the value it was given. | M3 | — |
+| QUALITY-130 | The M4 exit walk records raw runner evidence for a real `SLAB-UAT-*` WooCommerce draft created through the UI; the draft matches the reviewed ready set and is not published live. | M4 | — |